![]() Next, I modified the flags and removed the esp and boot from the old ESP partition and changed it to msftdata. I selected /dev/sda1 then choose copy to the unallocated 1000MB partition and selected to resize to 500MB, applied the changes, the copy completed. In gparted, I see the /dev/sda with all the partitions. I booted into a live linux environment via USB (/dev/sdb) and loaded gparted. My ESP was on /dev/sda1 and was 100MB Fat32. I had an existing unallocated 1000MB available on /dev/sda. Looks like I still have space for a kernel or two and I'm glad I avoided the parition resizing headache/stress. With linux, linux-lts and Windows 10 installed, df -h shows: Filesystem Size Used Avail Use% Mounted on I then ran sudo mkinitcpio -P to rebuild the images and test the config file. In my case, the linux config file is at /etc/mkinitcpio.d/linux.preset (you should have one per installed kernel). I would recommend having a backup installer (USB flash drive or the like) on hand in case you need the fallback kernel. That said, if you can boot from the default kernel and do not plan on changing your hardware, you should be all good. Before doing any of this, please read up and make sure you understand the risks involved with not having a fallback kernel available. The fallback images are a lot larger than the default images. I then deleted the fallback images (for example: /boot/initramfs-linux-fallback.img). I solved this issue by removing the "fallback" preset(s) in "mkinitcpio" config files. Seeing as this is the actual problem here, I'll address it. So I'm stuck with only 100MB of EFI partition which is totally insufficient for multiple kernels. See also the description of the command Create partition msr. You have the sizes and offsets right, this should work, and in my Type the command create partition msr size=128 offset=103424. KB so the free space begins at an offset of 1024 + (100*1024) = 103424 I had the EFI System Partition at the start of theĭisk now which is 100 MB in size, and the partition list says that itīegan at an offset of 1024 kB. Select disk X where X is the number of the physical driveĬontaining the Boot partition. ![]() If the tools fail to move the MSR, or if Windows cannot boot after the MSR was moved,īoot into the Windows installation media, and press SHIFT+F10 to open
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |